24/7 emergency line: (239) 324-6776 Office hours: Mon–Fri 8 a.m.–5 p.m. · FL License CFC1429748
5.0 on Google · 46 reviews

Well Pump Repair & Replacement

No water, weak pressure or a pump that clicks on and off all day? Sunshine Plumbing Services repairs and replaces well pumps, pressure tanks and pressure switches in Lehigh Acres, North Fort Myers, Pine Island, Golden Gate Estates and all of Lee and Collier County. You get a diagnosis of the real problem, an upfront price before we start and a 1-year guarantee.

Pumps, tanks & switchesFree estimatesSame-day service24/7 for no water

Well pump repair in Lee & Collier County

When you live on a private well, your pump is your water company. When it fails, there is no one else to call. We repair and replace well pumps and the equipment around them, and we work fast, because nobody should go long without running water.

  • Well pump repair: diagnosing and fixing pumps that are weak, noisy, tripping breakers or not running.
  • Well pump replacement: submersible and jet pumps when repair doesn't make sense.
  • Pressure tank service: checking, recharging or replacing tanks that have lost their air charge or failed.
  • Pressure switch and gauge replacement: the controls that tell your pump when to run.
  • Well plumbing: lines, fittings and valves between the well, tank and house.
  • Water treatment: filters and softeners that protect a pump and the rest of the home. See water filtration.

We're a Florida state-certified plumbing contractor (license CFC1429748), a second-generation family business based in North Fort Myers.

Signs your well pump is failing

Pumps tend to give you a warning before they quit. Catching it early can save the pump, and it can save you a night without water.

  • No water at allA tripped breaker, failed pump, bad switch or electrical problem.
  • Low water pressureA worn pump, failing tank or clogged line can all drop pressure.
  • Pressure that surgesWater spits or fades in the shower, often from a waterlogged tank.
  • Pump clicks on and offShort-cycling. It wears out the pump quickly.
  • Air or sputtering at tapsAir in the lines or a pump pulling in air.
  • Sandy or cloudy waterSediment from the well or a failing pump.
  • Higher electric billsA struggling pump runs longer and uses more power.
  • Pump runs constantlyA leak, failing pump or pressure problem keeps it from shutting off.
Lost water pressure or all water?

Most well pump calls are scheduled the same day.

Call (239) 324-6776

Pressure tanks and short-cycling

A pressure tank holds water under pressure so the pump doesn't have to start every time you open a faucet. Inside the tank, a cushion of air pushes against the water. When that air charge fails or the internal bladder tears, the tank fills with water, a condition called waterlogged, and the pump starts and stops again and again.

That rapid on-and-off is called short-cycling, and it is hard on a pump. Every start draws a surge of power and heat, and a pump built to run for a few minutes at a time is suddenly starting dozens of times an hour. A bad tank can kill a good pump.

If your pump clicks on and off, don't wait. We check the tank pressure, the bladder, the switch and the pump, and fix the cause. In some cases, a recharge is enough. In others, the tank needs replacement, and we tell you honestly which it is.

Well water in Lehigh Acres, Pine Island and Golden Gate Estates

Private wells are common across large parts of our service area. Lehigh Acres, Suncoast Estates, Pine Island, Matlacha, Alva, Golden Gate Estates and parts of North Fort Myers have many homes with their own wells, and we work on all of them.

  • Mineral-heavy water. Southwest Florida groundwater can contain iron, sulfur and hardness minerals that wear on pumps, tanks, fixtures and water heaters.
  • Sand and sediment. Shallow wells can pull in sand that wears pump parts.
  • Storms and power loss. Wells depend on electricity, and surges and outages from storms can damage pump motors and controls.
  • Flooding. Water over a wellhead can contaminate the well and damage the equipment. Don't use the water until it has been checked.
  • Age. Many wells in older neighborhoods have equipment that has run for decades.

Local conditions are part of the diagnosis. We know the area, and we match repairs to what the wells here deal with.

Replace after the storm: a well pump story from Irma

Hurricanes test a well pump system. Power surges, flooding and fallen trees can take out the pump, the wiring or the whole wellhead. One homeowner described it this way after Hurricane Irma:

"We had our well completely give out after Irma and Mike was able to replace everything and did it so fast. His work ethic is impeccable. He is very honest and loyal."

Irina Ostapovich Homan, Google review

That is how we want every well job to go: a clear diagnosis, a fast replacement and an honest explanation of what was needed. If your well was affected by a storm, call us before you restart the pump. Running a damaged pump can make the damage worse.

Pump short-cycling or clicking?

It can ruin a pump fast. Call for a free estimate.

Get a Free Estimate

Repair or replace your well pump?

We give you honest advice with no pressure and no hard sell. If a small part solves the problem, we'll say so.

  1. Age of the pump. Well pumps often last well over a decade, but age, water quality and how the system is set up affect that. An older pump with a new problem often points toward replacement.
  2. The failing part. A bad pressure switch, a waterlogged tank or a tripped overload is often a straightforward fix. A burned-out pump motor usually means replacement.
  3. What's behind the failure. If a tank problem or short-cycling killed the pump, replacing only the pump will repeat the failure. We fix the cause.
  4. Cost of repair vs. replacement. Past a certain point, repairing an old pump doesn't make sense.

You get an upfront price for each option before any work starts. If you have a quote from somewhere else, we give free estimates and are glad to take a second look.

Tip: Write down your pump's age, the tank's make, if you know it, and the symptoms. If you can find the pressure gauge, note the reading too. It speeds up the diagnosis.

What to expect when you call

  1. Call or book online. No-water calls are prioritized, and emergency calls are answered 24/7.
  2. We diagnose the whole system. Power, switch, tank, pump and lines, not just the symptom.
  3. You get options and an upfront price. The price is agreed before work begins.
  4. We repair or replace and test. We check pressure, cycle times and leaks before we leave.
  5. We explain how to keep it running. Simple checks and warning signs to watch.
  6. You're covered for a year. Our 1-year personal guarantee covers parts and service.

Our plumbing maintenance plan includes a whole-home plumbing check, which is a good way to look at a well system before it fails.

Keeping a well system healthy

  • Check the pressure gauge now and then. Sudden changes are a warning.
  • Listen for short-cycling. Frequent clicking is the most common early warning.
  • Have the tank's air charge checked periodically.
  • Treat the water if it carries iron, sulfur or hardness, to protect pump and fixtures.
  • Protect the equipment. After a storm, wait for a check before restarting a pump that has been flooded.
  • Know your water heater's condition. Well water is hard on it. See water heater service.

Small habits like these usually cost less than one emergency.

Well pump service near you

We service wells across Lee and Collier County, including:

Well pump FAQ

How do I know if my well pump is going bad?

Common signs include low or surging water pressure, a pump that clicks on and off, sputtering faucets, sandy water, higher electric bills or a pump that runs constantly. If you have no water at all, a tripped breaker or failed pump is the likely cause.

What is short-cycling and why is it bad?

Short-cycling is when the pump turns on and off rapidly, usually because the pressure tank has failed or lost its air charge. Each start strains the pump motor, so short-cycling can destroy a good pump quickly.

How long does a well pump last?

Well pumps often last well over a decade, but the lifespan depends on water quality, sediment, how often the pump starts and how well the pressure tank works. We assess the pump and the rest of the system before recommending anything.

Can you replace a well pump the same day?

Often yes. No-water calls are prioritized, and we plan to diagnose and, where possible, complete the repair or replacement the same day. We explain the timing when you call.

My well was flooded in a storm. Is it safe to use?

Don't use the water or restart the pump until the system has been checked. Floodwater can contaminate a well and damage the pump, wiring and controls. Call us for an inspection of the equipment.

Do you work on wells in Lehigh Acres and Pine Island?

Yes. We service wells in Lehigh Acres, Suncoast Estates, North Fort Myers, Pine Island, Matlacha, Alva, Golden Gate Estates and the rest of Lee and Collier County.

Do you offer free estimates on well pumps?

Yes. We give free estimates and an upfront price before work begins, and our work is covered by a 1-year personal guarantee on parts and service.

Related plumbing services

No water or weak pressure? Let's fix it.

Well pump repair and replacement across Lehigh Acres, North Fort Myers, Pine Island and all of Lee & Collier County, with an upfront price and a 1-year guarantee.

Office Mon–Fri 8–5 · Emergency line answered 24/7